Printing Tips
BUY GOOD QUALITY PAPER
Standard copy paper usually has a weight of 80gsm. I would recommend buying paper no less than 120gsm. Anything less than this, prints colour poorly as the paper is not thick enough to absorb the ink properly.
WHAT TYPE OF PRINTER SHOULD I USE?
These are some general tips for buying a Printer but the technology is changing all the time. Remember just because the Printer is cheap doesn't mean it won't cost you a fortune in toner cartridges.
INKJET PRINTERS
Inkjet Printers are usually cheaper to buy but the consumables, i.e. Printer Toners / Fusers tend to be more expensive. The general rule of thumb is the cheaper the Printer, the more expensive the Toner. Inkjet Printers also tend to be slower than Laser Printers. Inkjet Printers are for high quality photographic prints as they are set up for this.
LASER PRINTERS
Laser Printers are quieter, faster and usually provide you with less hassle with fewer printer errors. Laser Printer ink cartridges are usually cheaper than Inkjet cartridges. Laser Printers are best for text documents and Posters with a lot of solid colour.
TIPS FOR SAVING MONEY ON PRINTING COSTS
Buy a new printer. If you're using an older Printer you're probably buying expensive toner catridges. The newer models are alot cheaper and their consumables can be quite a bit cheaper. You might find that the savings on the new consumbables are enough to offset the cost of buying a new printer within a few months.
Recycle printer cartridges. Many office supply stores will give you discounted toner cartridges if you return your empty toner cartridges to them. And it's good for the environment too.
Consider refilling toner cartridges rather than returning them. You can buy a kit for refilling inkjet cartridges that can save you a money over time.
Buy remanufactured toner cartridges from stores which specialise in recycling printer cartridges and reselling them.
Buy Toners in bulk - You can find some great deals online for buying Ink Cartridges in bulk for a lot cheaper.
Use Draft mode - If your Printer settings have a draft mode, use this to use less ink when printing your draft signs.
DISPLAY TIPS
Always change your posters on a regular basis. Sun-damaged or rough edged posters look very unprofessional and can damage the look of your store.
Use some of the following solutions to keep your printables looking clean and professional.
LAMINATING
Buy a Laminator. This doesn't have to be an expensive option. You can get an A3 laminator for approximately £20-£30.
5 tips for great Lamination:
1) Check that the indicator light is glowing to insure proper temperature has been reached.
2) Turn machine off when project is completed as too much heat can damage the printable.
3) Leave ample room for the completed printable to exit the machine. Remove printable from machine once finished. Allow printable to lay flat for cooling.
4) A test sheet is always recommended before beginning your laminating project to guarantee picture-perfect lamination.
5) Trim excess lamination only after printable has cooled.
Avery® have a range of self-laminating adhesives available. These Signs are quick and easy to use and can be removed easily without leaving any sticky residue.
ACRYLIC TABLE TOP SIGN HOLDERS
Perfect for highlighting certain sale products in a display area. These can be purchased in a number of sizes from A5-A3 and also double sided. Use them to display price cards or special offers.
CHANGEABLE POSTER FRAMES
Attach these securely to a wall and change them regularly by easily sliding in your printables. Available in various formats from plastic to aluminium.
50 websites supporting small businesses»